Product Details:
Payment & Shipping Terms:
|
Inner Diameter: | 28mm | Outner Diameter: | 62mm |
---|---|---|---|
Length: | 30inch |
30"5um pp sediment cartridge filter pp spun filter cartridge melt blown filter
Melt Blown PP Sediment Filter Cartridge PP Melt Blown Filter Cartridge introduction:
PP melt blown filter cartridge (PPF) is made from polypropylene material. It can remove
suspendedsubstances, particles and rust effectively. This cartridge usually works as the
prefiltration to protectthe behind filtration for water treatment system. Special cartridges
can be customized.
Melt Blown PP Sediment Filter Cartridge PP Melt Blown Filter Cartridge parameters:
Name |
Melt Blown PP Sediment Filter Cartridge PP Melt Blown Filter Cartridge |
Length | 20 inch =508mm |
Inner diameter | 28mm |
Outer diameter | 62mm |
Weight | 220g |
Function | pre-filter use in the filter hosings to remove sediment ,iron trust and hair. |
Processing flow | 1000L/H |
Replacement time | 6 months |
Maximum differential pressure | 3 kg f/cm² |
Maximum operating temperature | 5-80°c |
MELT BLOWN WATER FILTER CARTRIDGE
Using 100% food grade Polypropylene (PP) as material, the filter cartridge contains no wetting
agents, solvents, antistatic agents or binders.
By special production technology to control the diameter of PP fiber, the micron rate of filter cartridge
is controlled. Removing efficience can reach 98%.
The surface layer of the filter cartridge is designed to be low density to assure the high dirt-holding
capability, while the inner layer is higher density to keep the accurate filtration ability to small particles.
The density type is 30% higher filtration effect than the general type.
PP cartridge is avirulent insipidity of polypropylene particles, through heat melt, silk, traction, accept to the forming
tubular filter. The main material is polypropylene primarily. It is not only widely used in water treatment, water filter
and reverse osmosis system to remove bacteria, heavy metal, dust and other harmful substances. It also has the
outstanding chemical compatibility, that used in strong acid,strong alkali and organic solvents.Carrying ability, long
service life and low cost.
1. This pp melt blown filter caritridge is the embossing surface type ,which can remove impurity clearly because of its strong assimilative capality .It can remove sand sediment ,iron rust ,hair and other impurity in water .
2. Typical applications for the polypropylene filter (also
known as a PP filter) include under sink filtration,
whole house filtration, potable water, food service,
beverages, reverse osmosis prefiltration, fine chemicals,
light industrial uses (electronics, plating solutions,
etc), and more.
PP cartridge is avirulent insipidity of polypropylene particles, through heat melt, silk, traction, accept to the forming
tubular filter. The main material is polypropylene primarily. It is not only widely used in water treatment, water filter
and reverse osmosis system to remove bacteria, heavy metal, dust and other harmful substances. It also has the
outstanding chemical compatibility, that used in strong acid,strong alkali and organic solvents.Carrying ability, long
service life and low cost.
Melt Blown PP Sediment Filter Cartridge PP Melt Blown Filter Cartridge shows: